reltool
Main API of the Reltool application
This is an interface module for the Reltool application.
Reltool is a release management tool. It analyses a
given Erlang/OTP installation and determines various dependencies
between applications. The graphical
frontend depicts the
dependencies and enables interactive customization of a target
system. The backend provides a batch
interface for
generation of customized target systems.
The tool uses an installed Erlang/OTP system as input.
root_dir
is the root directory of the analysed system and
it defaults to the system executing reltool
. Applications
may also be located outside root_dir
. lib_dirs
defines library directories where additional applications
may reside and it defaults to the directories
listed by the operating system environment variable
ERL_LIBS
. See the module code
for more info.
Finally single modules and entire applications may be read from
Escripts.
Some configuration parameters control the behavior of Reltool
on system (sys
) level. Others provide control on
application (app
) level and yet others are on module
(mod
) level. Module level parameters override application
level parameters and application level parameters override system
level parameters. Escript escript
level parameters
override system level parameters.
The following top level options
are supported:
config
This is the main option and it controls the configuration
of reltool
. It can either be a sys
tuple or
a name of a file
containing a sys tuple.
trap_exit
This option controls the error handling behavior of
reltool
. By default the window processes traps
exit, but this behavior can altered by setting
trap_exit
to false
.
wx_debug
This option controls the debug level of wx
. As its
name indicates it is only useful for debugging. See
wx:debug/1
for more info.
Besides the already mentioned source parameters root_dir
and lib_dirs
, the following system (sys
) level
options are supported:
erts
Erts specific configuration. See application level options below.
escript
Escript specific configuration. An escript has a mandatory file name and escript level options that are described below.
app
Application specific configuration. An application has a mandatory name and application level options that are described below.
mod_cond
This parameter controls the module inclusion policy. It
defaults to all
which means that if an application is
included (either explicitly or implicitly) all modules in that
application will be included. This implies that both modules
that exist in the ebin
directory of the application,
as well as modules that are named in the app
file will
be included. If the parameter is set to ebin
, both
modules in the ebin
directory and derived modules are
included. If the parameter is set to app
, both modules
in the app
file and derived modules are included.
derived
means that only modules that are used by other
included modules are included. The mod_cond
setting on
system level is used as default for all applications.
incl_cond
This parameter controls the application and escript
inclusion policy. It defaults to derived
which means
that the applications that do not have any explicit
incl_cond
setting, will only be included if any other
(explicitly or implicitly included) application uses it. The
value include
implies that all applications and
escripts that do not have any explicit incl_cond
setting will be included. exclude
implies that all
applications and escripts) that do not have any explicit
incl_cond
setting will be excluded.
boot_rel
A target system may have several releases but the one given
as boot_rel
will be used as default when the system is
booting up.
rel
Release specific configuration. Each release maps to a
rel
, script
and boot
file. See the
module systools
for more info about the details. Each
release has a name, a version and a set of applications with a
few release specific parameters such as type and included
applications.
relocatable
This parameter controls whether the erl
executable
in the target system should automatically determine where it
is installed or if it should use a hardcoded path to the
installation. In the latter case the target system must be
installed with reltool:install/2
before it can be
used. If the system is relocatable, the file tree containing
the target system can be moved to another location without
re-installation. The default is true
.
profile
The creation of the specification for a target system is
performed in two steps. In the first step a complete
specification is generated. It will likely contain much more
files than you are interested in in your customized target
system. In the second step the specification will be filtered
according to your filters. There you have the ability to
specify filters per application as well as system wide
filters. You can also select a profile
for your
system. Depending on the profile
, different default
filters will be used. There are three different profiles to
choose from: development
, embedded
and
standalone
. development
is default. The
parameters that are affected by the profile
are:
incl_sys_filters
, excl_sys_filters
,
incl_app_filters
and excl_app_filters
.
app_file
This parameter controls the default handling of the
app
files when a target system is generated. It
defaults to keep
which means that app
files are
copied to the target system and their contents are kept as
they are. strip
means that a new app
file is
generated from the contents of the original app
file
where the non included modules are removed from the
file. all
does also imply that a new app
file is
generated from the contents of the original app
file,
with the difference that all included modules are added to the
file. If the application does not have any app
file a
file will be created for all
but not for keep
and strip
.
debug_info
The debug_info
parameter controls whether the debug
information in the beam file should be kept (keep
) or
stripped strip
when the file is copied to the target
system.
incl_sys_filters
This parameter normally contains a list of regular
expressions that controls which files in the system
should be included. Each file in the target system must match
at least one of the listed regular expressions in order to be
included. Further the files may not match any filter in
excl_sys_filters
in order to be included. Which
application files should be included is controlled with
the parameters incl_app_filters
and
excl_app_filters
. This parameter defaults to
[".*"]
.
excl_sys_filters
This parameter normally contains a list of regular
expressions that controls which files in the system should
not be included in the target system. In order to be
included, a file must match some filter in
incl_sys_filters
but not any filter in
excl_sys_filters
. This parameter defaults to
[]
.
incl_app_filters
This parameter normally contains a list of regular
expressions that controls which application specific files
that should be included. Each file in the application must
match at least one of the listed regular expressions in order
to be included. Further the files may not match any filter in
excl_app_filters
in order to be included. This
parameter defaults to [".*"]
.
excl_app_filters
This parameter normally contains a list of regular
expressions that controls which application specific files
should not be included in the target system. In order to
be included, a file must match some filter in
incl_app_filters
but not any filter in
excl_app_filters
. This parameter defaults to
[]
.
incl_archive_filters
This parameter normally contains a list of regular
expressions that controls which top level directories in an
application should be included in an archive file (as
opposed to being included as a regular directory outside the
archive). Each top directory in the application must match at
least one of the listed regular expressions in order to be
included. Further the files may not match any filter in
excl_app_filters
in order to be included. This
parameter defaults to [".*"]
.
excl_archive_filters
This parameter normally contains a list of regular
expressions that controls which top level directories in an
application should not be included in an archive file. In
order to be included in the application archive, a top
directory must match some filter in incl_archive_filters
but not any filter in excl_archive_filters
. This
parameter defaults to ["^include$","^priv$"]
.
archive_opts
This parameter contains a list of options that are given to
zip:create/3
when application specific files are
packaged into an archive. Only a subset of the options are
supported. The most useful options in this context are the ones
that control which types of files should be compressed. This
parameter defaults to []
.
On application (escript
) level, the following options are
supported:
incl_cond
The value of this parameter overrides the parameter with the same name on system level.
On application (app
) level, the following options are
supported:
vsn
The version of the application. In an installed system there may
exist several versions of an application. The vsn
parameter
controls which version of the application will be chosen.
This parameter is mutual exclusive with lib_dir
. If
vsn
and lib_dir
are both omitted, the latest version
will be chosen.
lib_dir
The directory to read the application from. This parameter can be used to point out a specific location to fetch the application from. This is useful for instance if the parent directory for some reason is no good as a library directory on system level.
This parameter is mutual exclusive with vsn
. If
vsn
and lib_dir
are both omitted, the latest version
will be chosen.
mod
Module specific configuration. A module has a mandatory name and module level options that are described below.
mod_cond
The value of this parameter overrides the parameter with the same name on system level.
incl_cond
The value of this parameter overrides the parameter with the same name on system level.
app_file
The value of this parameter overrides the parameter with the same name on system level.
debug_info
The value of this parameter overrides the parameter with the same name on system level.
incl_app_filters
The value of this parameter overrides the parameter with the same name on system level.
excl_app_filters
The value of this parameter overrides the parameter with the same name on system level.
incl_archive_filters
The value of this parameter overrides the parameter with the same name on system level.
excl_archive_filters
The value of this parameter overrides the parameter with the same name on system level.
archive_opts
The value of this parameter overrides the parameter with the same name on system level.
On module (mod
) level, the following options are
supported:
incl_cond
This parameter controls whether the module is included or not. By
default the mod_incl
parameter on application and system level
will be used to control whether the module is included or not. The
value of incl_cond
overrides the module inclusion policy.
include
implies that the module is included, while
exclude
implies that the module is not included.
derived
implies that the module is included if it is used
by any other included module.
debug_info
The value of this parameter overrides the parameter with the same name on application level.
DATA TYPES
options() = [option()] option() = {config, config() | file()} | {trap_exit, bool()} | {wx_debug, term()} config() = {sys, [sys()]} sys() = {root_dir, root_dir()} | {lib_dirs, [lib_dir()]} | {profile, profile()} | {erts, app()} | {escript, escript_file(), [escript()]} | {app, app_name(), [app()]} | {mod_cond, mod_cond()} | {incl_cond, incl_cond()} | {boot_rel, boot_rel()} | {rel, rel_name(), rel_vsn(), [rel_app()]} | {relocatable, relocatable()} | {app_file, app_file()} | {debug_info, debug_info()} | {incl_sys_filters, incl_sys_filters()} | {excl_sys_filters, excl_sys_filters()} | {incl_app_filters, incl_app_filters()} | {excl_app_filters, excl_app_filters()} | {incl_archive_filters, incl_archive_filters()} | {excl_archive_filters, excl_archive_filters()} | {archive_opts, [archive_opt()]} app() = {vsn, app_vsn()} | {lib_dir, lib_dir()} | {mod, mod_name(), [mod()]} | {mod_cond, mod_cond()} | {incl_cond, incl_cond()} | {debug_info, debug_info()} | {app_file, app_file()} | {incl_sys_filters, incl_sys_filters()} | {excl_sys_filters, excl_sys_filters()} | {incl_app_filters, incl_app_filters()} | {excl_app_filters, excl_app_filters()} | {incl_archive_filters, incl_archive_filters()} | {excl_archive_filters, excl_archive_filters()} | {archive_opts, [archive_opt()]} mod() = {incl_cond, incl_cond()} | {debug_info, debug_info()} rel_app() = app_name() | {app_name(), app_type()} | {app_name(), [incl_app()]} | {app_name(), app_type(), [incl_app()]} app_name() = atom() app_type() = permanent | transient | temporary | load | none app_vsn() = string() archive_opt = zip_create_opt() boot_rel() = rel_name() app_file() = keep | strip | all debug_info() = keep | strip dir() = string() escript() = {incl_cond, incl_cond()} escript_file() = file() excl_app_filters() = regexps() excl_archive_filters() = regexps() excl_sys_filters() = regexps() file() = string() incl_app() = app_name() incl_app_filters() = regexps() incl_archive_filters() = regexps() incl_cond() = include | exclude | derived incl_sys_filters() = regexps() lib_dir() = dir() mod_cond() = all | app | ebin | derived | none mod_name() = atom() profile() = development | embedded | standalone re_regexp() = string() reason() = string() regexps() = [re_regexp()] | {add, [re_regexp()]} | {del, [re_regexp()]} rel_file() = term() rel_name() = string() rel_vsn() = string() relocatable = boolean() root_dir() = dir() script_file() = term() server() = server_pid() | options() server_pid() = pid() target_dir() = file() window_pid() = pid() base_dir() = dir() base_file() = file() top_dir() = file() top_file() = file() target_spec() = [target_spec()] | {create_dir, base_dir(), [target_spec()]} | {create_dir, base_dir(), top_dir(), [target_spec()]} | {archive, base_file(), [archive_opt()], [target_spec()]} | {copy_file, base_file()} | {copy_file, base_file(), top_file()} | {write_file, base_file(), iolist()} | {strip_beam_file, base_file()}
Functions
create_target(Server, TargetDir) -> ok | {error, Reason}
Server = server()
TargetDir = target_dir()
Reason = reason()
Create a target system. Gives the same result as
{ok,TargetSpec}=reltool:get_target_spec(Server)
and
reltool:eval_target_spec(TargetSpec,RootDir,TargetDir)
.
eval_target_spec(TargetSpec, RootDir, TargetDir) -> ok | {error, Reason}
TargetSpec = target_spec()
RootDir = root_dir()
TargetDir = target_dir()
Reason = reason()
Create the actual target system from a specification
generated by reltool:get_target_spec/1
. The creation of
the specification for a target system is performed in two
steps. In the first step a complete specification will be
generated. It will likely contain much more files than you are
interested in in your target system. In the second step the
specification will be filtered according to your filters. There
you have the ability to specify filters per application as well
as system wide filters. You can also select a profile
for
your system. Depending on the profile
, different default
filters will be used.
The top directories bin
, releases
and
lib
are treated differently from other files. All other
files are by default copied to the target system. The
releases
directory contains generated rel
,
script
, and boot
files. The lib
directory
contains the applications. Which applications are included
and if they should be customized (archived, stripped from debug
info etc.) is specified with various configuration
parameters. The files in the bin
directory are copied
from the erts-vsn/bin
directory, but only those files
that were originally included in the bin
directory of the
source system.
If the configuration parameter relocatable
was set to
true
there is no need to install the target system with
reltool:install/2
before it can be started. In that case
the file tree containing the target system can be moved without
re-installation.
In most cases, the RootDir
parameter should be set to
the same as the root_dir
configuration parameter used in
the call to reltool:get_target_spec/1
(or code:root_dir()
if the configuration parameter is not
set). In some cases it might be useful to evaluate the same
target specification towards different root directories. This
should, however, be used with great care as it requires
equivalent file structures under all roots.
get_config(Server) -> {ok, Config} | {error, Reason}
Server = server()
Config = config()
Reason = reason()
Get reltool configuration. Shorthand for
reltool:get_config(Server,false,false)
.
get_config(Server, InclDefaults, InclDerived) -> {ok, Config} | {error, Reason}
Server = server()
InclDefaults = incl_defaults()
InclDerived = incl_derived()
Config = config()
Reason = reason()
Get reltool configuration. Normally, only the explicit
configuration parameters with values that differ from their
defaults are interesting. But the builtin default values can be
returned by setting InclDefaults
to true
. The
derived configuration can be returned by setting
InclDerived
to true
.
get_rel(Server, Relname) -> {ok, RelFile} | {error, Reason}
Server = server()
RelName = rel_name()
RelFile = rel_file()
Reason = reason()
Get contents of a release file. See rel(4)
for more
details.
get_script(Server, Relname) -> {ok, ScriptFile | {error, Reason}
Server = server()
RelName = rel_name()
ScriptFile = script_file()
Reason = reason()
Get contents of a boot script file. See script(4)
for
more details.
get_status(Server) -> {ok, [Warning]} | {error, Reason}
Server = server()
Warning = string()
Reason = reason()
Get status about the configuration
get_server(WindowPid) -> {ok, ServerPid} | {error, Reason}
WindowPid = window_pid()
ServerPid = server_pid()
Reason = reason()
Return the process identifier of the server process.
get_target_spec(Server) -> {ok, TargetSpec} | {error, Reason}
Server = server()
TargetSpec = target_spec()
Reason = reason()
Return a specification of the target system. The actual
target system can be created with
reltool:eval_target_spec/3
.
install(RelName, TargetDir) -> ok | {error, Reason}
RelName = rel_name()
TargetDir = target_dir()
Reason = reason()
Install a created target system
start() -> {ok, WindowPid} | {error, Reason}
WindowPid = window_pid()
Reason = reason()
Start a main window process with default options
start(Options) -> {ok, WindowPid} | {error, Reason}
Options = options()
WindowPid = window_pid()
Reason = reason()
Start a main window process with options
start_link(Options) -> {ok, WindowPid} | {error, Reason}
Options = options()
WindowPid = window_pid()
Reason = reason()
Start a main window process with options. The process is linked.
start_server(Options) -> {ok, ServerPid} | {error, Reason}
Options = options()
ServerPid = server_pid()
Reason = reason()
Start a server process with options. The server process identity can be given as an argument to several other functions in the API.
stop(Pid) -> ok | {error, Reason}
Pid = server_pid() | window_pid()()
Reason = reason()
Stop a server or window process