snmpa_conf
Utility functions for handling the agent config files.
The module snmpa_conf
contains various utility functions to
used for manipulating (write/append/read) the config files of the
SNMP agent.
DATA TYPES
transportDomain() = transportDomainUdpIpv4 | transportDomainUdpIpv6 transportAddressIPv4() = [integer()], length 4 transportAddressIPv6() = [integer()], length 8 transportAddressMask() = [integer()], length 0 (default), 6 (IPv4) or 10 (IPv6)
Functions
agent_entry(Tag, Val) -> agent_entry()
Tag = intAgentIpAddress | intAgentUDPPort | intAgentMaxPacketSize | snmpEngineMaxMessageSize | snmpEngineID
Val = term()
agent_entry() = term()
Create an entry for the agent config file, agent.conf
.
The type of Val
depends on the value of Tag
,
see
Agent Information
for more info.
write_agent_config(Dir, Conf) -> ok
write_agent_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [agent_entry()]
Write the agent config to the agent config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Agent Information for more info.
append_agent_config(Dir, Conf) -> ok
Dir = string()
Conf = [agent_entry()]
Append the config to the current agent config file.
Dir
is the path to the directory where to store the
config file.
See Agent Information for more info.
read_agent_config(Dir) -> Conf
Dir = string()
Conf = [agent_entry()]
Read the current agent config file.
Dir
is the path to the directory where to store the
config file.
See Agent Information for more info.
standard_entry(Tag, Val) -> standard_entry()
Tag = sysDescr | sysObjectID | sysContact | sysName | sysLocation | sysServices | snmpEnableAuthenTraps
Val = term()
standard_entry() = term()
Create an entry for the agent standard config file,
standard.conf
.
The type of Val
depends on the value of Tag
,
see
System Information
for more info.
write_standard_config(Dir, Conf) -> ok
write_standard_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [standard_entry()]
Write the agent standard config to the agent standard config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See System Information for more info.
append_standard_config(Dir, Conf) -> ok
Dir = string()
Conf = [standard_entry()]
Append the standard config to the current agent standard config file.
Dir
is the path to the directory where to store the
config file.
See System Information for more info.
read_standard_config(Dir) -> Conf
Dir = string()
Conf = [standard_entry()]
Read the current agent standard config file.
Dir
is the path to the directory where to store the
config file.
See System Information for more info.
context_entry(Context) -> context_entry()
Context = string()
context_entry() = term()
write_context_config(Dir, Conf) -> ok
write_context_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [context_entry()]
Write the agent context config to the agent context config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Contexts for more info.
append_context_config(Dir, Conf) -> ok
Dir = string()
Conf = [context_entry()]
Append the context config to the current agent context config file.
Dir
is the path to the directory where to store the
config file.
See Contexts for more info.
read_context_config(Dir) -> Conf
Dir = string()
Conf = [context_entry()]
Read the current agent context config file.
Dir
is the path to the directory where to store the
config file.
See Contexts for more info.
community_entry(CommunityIndex) -> community_entry()
community_entry(CommunityIndex, CommunityName, SecName, ContextName, TransportTag) -> community_entry()
CommunityIndex = string()
CommunityName = string()
SecName = string()
CtxName = string()
TransportTag = string()
community_entry() = term()
Create an entry for the agent community config file,
community.conf
.
CommunityIndex
must be a non-empty string.
community_entry("public")
translates to the following call:
community_entry(CommunityIndex, CommunityIndex, "initial", "", "")
.
community_entry("all-rights")
translates to the following
call: community_entry(CommunityIndex, CommunityIndex, CommunityIndex, "", "")
.
See Community for more info.
write_community_config(Dir, Conf) -> ok
write_community_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [community_entry()]
Write the agent community config to the agent community config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Community for more info.
append_community_config(Dir, Conf) -> ok
Dir = string()
Conf = [community_entry()]
Append the community config to the current agent community config file.
Dir
is the path to the directory where to store the
config file.
See Community for more info.
read_community_config(Dir) -> Conf
Dir = string()
Conf = [community_entry()]
Read the current agent community config file.
Dir
is the path to the directory where to store the
config file.
See Communities for more info.
target_addr_entry(Name, Ip, TagList, ParamsName, EngineId) -> target_addr_entry()
target_addr_entry(Name, Ip, TagList, ParamsName, EngineId, TMask) -> target_addr_entry()
target_addr_entry(Name, Ip, Udp, TagList, ParamsName, EngineId, TMask, MaxMessageSize) -> target_addr_entry()
target_addr_entry(Name, Ip, Udp, Timeout, RetryCount, TagList, ParamsName, EngineId, TMask, MaxMessageSize) -> target_addr_entry()
target_addr_entry(Name, Domain, Ip, Udp, Timeout, RetryCount, TagList, ParamsName, EngineId, TMask, MaxMessageSize) -> target_addr_entry()
Name = string()
Domain = transportDomain()
Ip = transportAddressIPv4() | transportAddressIPv6() (depends on Domain)
Udp = integer()
Timeout = integer()
RetryCount = integer()
TagList = string()
ParamsName = string()
EngineId = string()
TMask = transportAddressMask() (depends on Domain)
MaxMessageSize = integer()
target_addr_entry() = term()
Create an entry for the agent target_addr config file,
target_addr.conf
.
Name
must be a non-empty string.
target_addr_entry/5
translates to the following call:
target_addr_entry(Name, Ip, TagList, ParamsName, EngineId)
.
target_addr_entry/6
translates to the following call:
target_addr_entry(Name, Ip, 162, TagList, ParamsName, EngineId, TMask, 2048)
.
target_addr_entry/8
translates to the following call:
target_addr_entry(Name, Ip, Udp, 1500, 3, TagList, ParamsName, EngineId, TMask, MaxMessageSize)
.
See Target Address Definitions for more info.
write_target_addr_config(Dir, Conf) -> ok
write_target_addr_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [target_addr_entry()]
Write the agent target_addr config to the agent target_addr config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Target Address Definitions for more info.
append_target_addr_config(Dir, Conf) -> ok
Dir = string()
Conf = [target_addr_entry()]
Append the target_addr config to the current agent target_addr config file.
Dir
is the path to the directory where to store the
config file.
See Target Address Definitions for more info.
read_target_addr_config(Dir) -> Conf
Dir = string()
Conf = [target_addr_entry()]
Read the current agent target_addr config file.
Dir
is the path to the directory where to store the
config file.
See Target Address Definitions for more info.
target_params_entry(Name, Vsn) -> target_params_entry()
target_params_entry(Name, Vsn, SecName, SecLevel) -> target_params_entry()
target_params_entry(Name, MPModel, SecModel, SecName, SecLevel) -> target_params_entry()
Name = string()
Vsn = v1 | v2 | v3
MPModel = v1 | v2c | v3
SecModel = v1 | v2c | usm
SecName = string()
SecLevel = noAuthNoPriv | authNoPriv | authPriv
target_params_entry() = term()
Create an entry for the agent target_params config file,
target_params.conf
.
Name
must be a non-empty string.
Vsn
translates into MPModel
and SecModel
as follows:
\011 Vsn = v1 => MPModel = v1, SecModel = v1 \011 Vsn = v2 => MPModel = v2c, SecModel = v2c \011 Vsn = v3 => MPModel = v3, SecModel = usm
target_params_entry/2
translates to the following call:
target_params_entry(Name, Vsn, "initial", noAuthNoPriv)
.
target_params_entry/4
translates to the following
call: target_params_entry(Name, MPModel, SecModel, SecName, SecLevel)
where MPModel
and
SecModel
is mapped from Vsn
, see above.
See Target Parameters Definitions for more info.
write_target_params_config(Dir, Conf) -> ok
write_target_params_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [target_params_entry()]
Write the agent target_params config to the agent target_params config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Target Parameters Definitions for more info.
append_target_params_config(Dir, Conf) -> ok
Dir = string()
Conf = [target_params_entry()]
Append the target_params config to the current agent target_params config file.
Dir
is the path to the directory where to store the
config file.
See Target Parameters Definitions for more info.
read_target_params_config(Dir) -> Conf
Dir = string()
Conf = [target_params_entry()]
Read the current agent target_params config file.
Dir
is the path to the directory where to store the
config file.
See Target Parameters Definitions for more info.
vacm_s2g_entry(SecModel, SecName, GroupName) -> vacm_s2g_entry()
vacm_acc_entry(GroupName, Prefix, SecModel, SecLevel, Match, ReadView, WriteView, NotifyView) -> vacm_acc_entry()
vacm_vtf_entry(ViewIndex, ViewSubtree) -> vacm_vtf_entry()
vacm_vtf_entry(ViewIndex, ViewSubtree, ViewStatus, ViewMask) -> vacm_vtf_entry()
SecModel = v1 | v2c | usm
SecName = string()
GroupName = string()
Prefix = string()
SecLevel = noAuthNoPriv | authNoPriv | authPriv
Match = prefix | exact
ReadView = string()
WriteView = string()
NotifyView = string()
ViewIndex = integer()
ViewSubtree = [integer()]
ViewStatus = included | excluded
ViewMask = null | [zero_or_one()]
zero_or_one() = 0 | 1
vacm_s2g_entry() = term()
vacm_acc_entry() = term()
vacm_vtf_entry() = term()
Create an entry for the agent vacm config file,
vacm.conf
.
vacm_vtf_entry/2
translates to the following call:
vacm_vtf_entry(ViewIndex, ViewSubtree, included, null)
.
See MIB Views for VACM for more info.
write_vacm_config(Dir, Conf) -> ok
write_vacm_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [vacm_entry()]
vacm_entry() = vacm_sg2_entry() | vacm_acc_entry() | vacm_vtf_entry()
Write the agent vacm config to the agent vacm config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See MIB Views for VACM for more info.
append_vacm_config(Dir, Conf) -> ok
Dir = string()
Conf = [vacm_entry()]
Append the vacm config to the current agent vacm config file.
Dir
is the path to the directory where to store the
config file.
See MIB Views for VACM for more info.
read_vacm_config(Dir) -> Conf
Dir = string()
Conf = [vacm_entry()]
Read the current agent vacm config file.
Dir
is the path to the directory where to store the
config file.
See MIB Views for VACM for more info.
usm_entry(EngineId) -> usm_entry()
usm_entry(EngineID, UserName, SecName, Clone, AuthP, AuthKeyC, OwnAuthKeyC, PrivP, PrivKeyC, OwnPrivKeyC, Public, AuthKey, PrivKey) -> usm_entry()
EngineId = string()
UserName = string()
SecName = string()
Clone = zeroDotZero | [integer()]
AuthP = usmNoAuthProtocol | usmHMACMD5AuthProtocol, | usmHMACSHAAuthProtocol
AuthKeyC = string()
OwnAuthKeyC = string()
PrivP = usmNoPrivProtocol | usmDESPrivProtocol | usmAesCfb128Protocol
PrivKeyC = string()
OwnPrivKeyC = string()
Public = string()
AuthKey = [integer()]
PrivKey = [integer()]
usm_entry() = term()
Create an entry for the agent vacm config file,
vacm.conf
.
usm_entry/1
translates to the following call:
usm_entry("initial", "initial", zeroDotZero, usmNoAuthProtocol, "", "", usmNoPrivProtocol, "", "", "", "", "")
.
See Security data for USM for more info.
write_usm_config(Dir, Conf) -> ok
write_usm_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [usm_entry()]
Write the agent usm config to the agent usm config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Security data for USM for more info.
append_usm_config(Dir, Conf) -> ok
Dir = string()
Conf = [usm_entry()]
Append the usm config to the current agent vacm config file.
Dir
is the path to the directory where to store the
config file.
See Security data for USM for more info.
read_usm_config(Dir) -> Conf
Dir = string()
Conf = [usm_entry()]
Read the current agent usm config file.
Dir
is the path to the directory where to store the
config file.
See Security data for USM for more info.
notify_entry(Name, Tag, Type) -> notify_entry()
Name = string()
Tag = string()
Type = trap | inform
community_entry() = term()
Create an entry for the agent notify config file,
notify.conf
.
Name
must be a non-empty string.
See Notify Definitions for more info.
write_notify_config(Dir, Conf) -> ok
write_notify_config(Dir, Hdr, Conf) -> ok
Dir = string()
Hdr = string()
Conf = [notify_entry()]
Write the agent notify config to the agent notify config file.
Dir
is the path to the directory where to store the
config file.
Hdr
is an optional file header (note that this text is
written to the file as is).
See Notify Definitions for more info.
append_notify_config(Dir, Conf) -> ok
Dir = string()
Conf = [notify_entry()]
Append the notify config to the current agent notify config file.
Dir
is the path to the directory where to store the
config file.
See Notify Definitions for more info.
read_notify_config(Dir) -> Conf
Dir = string()
Conf = [community_entry()]
Read the current agent notify config file.
Dir
is the path to the directory where to store the
config file.
See Notify Definitions for more info.